Inside the post describes in detail the production of shoes at home. What material is required, what tool to use, you'll learn all this under the cut.First you need to select a tool: 1. Files 2. Shiloh 3. Beeswax 4. Tokmach 5. Protracted mites 6. Hammer 7. Boot knife Nails to tighten the shoe upper to shoe Polyurethane glue "desmokol" duct tape  Material preparation: Preparation of suede shoes for the top  Blanks soles "Cheprak" (the most dense part of the skins of cows) 
 Produce top: 
The first and most important step - making patterns for the uppers. To block this tape and paste it to paint the desired silhouette. Silhouette cut out, removed from the pad and transferred to the skin. I buy a block in specialized shops for shoemaking, but then changing its shape and tailored to the desired size. 
 Tighten the upper hand on the sole and shoe 






 The top is glued to the bottom, you can now cut off the excess suede, pull out the nails and glue decorative welt from kozhkartona. 

 Glue the second part of the foot 

 Now prikleevaem outer layer of the sole. It is very dense and thick skin - saddle, large size, than logging - better then trim the excess

 Soles and the workpiece pressed tightly against each other and to repel the hammer for a tight grip 



 Make a heel and taps


 For a heel, we use the same skin, and for the sole 
 Bonding technique tazhe - desmokol applied to both surfaces in two coats, after which the adhesive foam tape is activated by heating 











 At welt soles I put a layer of beeswax, and then vzharivayu heated to the desired temperature tokmach (a special tool for polishing the heel and the lateral surface of the foot) 


 Now, carefully polish the side surface of the sole ordinary cloth, removing izlizhki wax. Boot is ready.

 Proud of themselves and the result.